2
2010 ST-8410
Welcome
Thank you for selecting the Bush-Whacker 8410 Rotary Mower. Your machine
has been carefully inspected by both the factory and the dealership prior to being
received by you to ensure that it is ready for operation.
This manual explains the proper operation of your machine. It is very important
that you read and understand these instructions before operating or maintaining
the machine. Failure to do so could result in personal injury or even death to you
or passersby. Consult your Bush-Whacker dealership if you do not understand the
instructions in this manual or need additional information.
Hall Manufacturing, Inc. reserves the right to make changes at any time without
notice or obligation. Additional copies of the manuals are available from your lo-
cal Bush-Whacker dealer.
Hall Manufacturing, Inc.
3706 E. Washington Ave., P.O. Box Drawer 5638
North Little Rock, AR 72119
(501)945-7550
REV 1 (6-1-10): ADDED DUAL TAIL WHEEL PARTS DETAIL (48-49)
REVISED GEARBOX ASSEMBLY / DISASSEMBLY PROCEDURES (14-15)
To Next Page
