Bush BIFFC55177 - Installing the Doors

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
20
Installing your Built-In Combi Fridge - Freezer
Installing your Built-In Combi Fridge - Freezer
Bringing it all together
Securing the appliance
b: Secure the fixing bracket (G) to the kitchen unit
using screws (E), as shown in (7). Repeat for the
opposite side.

7
Installing the doors
a: Secure the guides (C) to the appliance doors
using screws (E), as shown in (8).
b: Open the appliance doors to right angles and
position the unit door against the appliance
door.
c: Raise the rails (D) onto the guides (C) aligning
with the groove.
d: Secure the rails (D) to the unit doors using
screws (E).
e: Set a 1-2mm gap on the handle side between
the unit itself and the unit doors by adjusting
guides (C) and screws (F) as necessary.
8