Installing your Freestanding Cooker
Bringing it all together
Installing your Freestanding Cooker
18
If you require any technical guidance or f nd that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Electrical connection
IMPORTANT: Electrical connections must be carried
out by a suitably qualified person and in accordance
with all relevant local building and installation
regulations.
1. See the rating label at the rear of the product for the
appliance’s load rating.
2. The cooker must be connected to a dedicated
circuit suitably rated for the load of the appliance
(see rating label at rear of appliance) It must be
connected via a
suitably rated cable to a double pole
isolator cooker switch also suitably rated for the
appliance.
3. The electrical cable should not touch the hot parts
of the appliance. .
The electrical cable should not be routed through
any area that may be aected by heat from the
oven, especially the area directly behind the oven.
To Next Page
Loading...
