EasyManua.ls Logo

Bush BRCP90ESS - Ceramic Hob Usage

Bush BRCP90ESS
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using your Freestanding Cooker
G
etting the most from your appliance
Using your Freestanding Cooker
20
o
r online at www.bush-support.com If you still require further assistance, call one of our experts on 01759 487838
How to use your ceramic hob
Single cooking zones (front left, rear left, rear
right, front right)
Turn the control knob to the desired position(low
or high). Adjustment is continuous so the cooking
zone will operate at any intermediate knob setting
between low&high. Once the cooking zone is hot,
the LED corresponding to the zone illuminates.
You can switch o˜ the cooking zone by turning
the knob, in either direction , to the o˜ position.
The residual heat warning light remains illuminated
when the temperate of the ceramic glass surface is
hot and it will switch o˜ once the surface
temperature has cooled
Dual cooking zone (center)
Turn the control knob clockwise to the desired
position between low and halfway as shown on
the diagram. The inner cooking zone will heat and
the outer cooking zone is o˜. Adjustment is
continuous so the cooking zone will operate at
any intermediate knob setting between
low&halfway. Once the inner cooking zone is hot,
the LED corresponding to the zone illuminates. To
operate the outer cooking zone, turn the knob
past the halfway setting. Both inner and outer
cooking zones will operate. Adjustment is
continuous so the both zones will operate at any
intermediate knob setting between halfway&max.
For highest setting with both zones operating, turn
the knob past max. To reduce heat setting, but
continue to operate both zones, turn the knob
anywhere between maximum and halfway setting.
To return to operating the inner cooking zone
only, turn the knob anticlockwise to between
halfway and low.
Note:
You can turn the knob in either direction
from any position to the setting your select.
The residual heat warning remains
illuminated when the temperature of the
ceramic glass surface is hot and it will
switch o˜ once the surface temperature
has cooled.
The whole surface of ceramic hob may be
hot even only one cooker is turned on,
please be careful.

Related product manuals