Sound Menu Content
Dolby Atmos
Your TV supports Dolby Atmos technology. By means of this technology the sound moves
around you in three-dimensional space, so you feel like you’re inside the action. You will
have the best experience if input audio bitstream is Atmos. Auto, On and O options will
be available. If set as Auto, the TV will switch between On and O modes automatically
depending on the input audio bitstream information, if the input audio bitstream is Atmos
this feature will work as if it is set as On. Set as O to disable.
Mode
Smart, Movie, Music, News and O options will be available. Set as O to disable.
Note: Some items in Sound menu will be greyed out and unavailable if set to an option
other than O. Settings of some other options may also change depending on the
current settings.
DTS Virtual:X
This feature will enhance your sound experience by providing a virtualisation of surround
speakers through your TV’s speakers. You can select one of the predefined sound modes.
Music, Sports, Cinema and O options will be available. Set as O to disable.
Note:
Some items in Sound menu will be greyed out and unavailable if set to an option other
than
O. Settings of some other options may also change depending on the current settings.
Sound Output
Sets the sound output preference. TV, S/PDIF, HDMI ARC, Headphone Only and Lineout
options will be available. There will be no sound output except through the selected
option and the headphone jack. Note that, if this option is set as Headphone Only, TV
speakers will be muted when headphone set is plugged in.
When you connect an external amplifier to your TV using the headphone jack, you can
select this option as Lineout. If you have connected headphones to the TV, set this option
as Headphone Only. Please ensure before using headphones that this menu item is set
to Headphone Only. If it is set to Lineout, the output from the headphone socket will
be set to maximum which could damage your hearing.
If HDMI ARC option is selected, CEC feature will be enabled.
Note: Depending on the selected option some items in Sound menu will appear as greyed out
and will be unavailable.
Limiting)
Sets the sound to obtain fixed output level between programmes.
If the Mode menu item is set to an option other than O the AVL setting options will
change. Auto, Night, Normal and O options will be available. In Auto mode the TV will
switch to Normal or Night mode automatically according to the current time information.
If no time information is available this option will always function as Normal. When the TV
switches to Night mode for the first time after setting this option as Auto, an information
bar will pop up on the screen.
Please note that compared to Normal mode Night mode provides more aggressive
dynamic compression control which is suitable for silent environments.
eARC
When the Sound Output option is set to HDMI ARC, the eARC menu option will be
available. Otherwise, it will be greyed out. This option will be set to On by default. Set to
O to disable. Refer to CEC section for more information.
Advanced Settings
Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode.
Dynamic Bass Enables or disables the Dynamic Bass.
DTS DRC
Dynamic Range Control provides gain adjustment of the source to maintain suitable
audible range at both low and high playback levels. It will function only if the source
audio format is DTS. Enable or disable the DTS DRC by setting as On or O.
Advanced features
Getting the most from your TV
Advanced features
31
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
To Next Page
Loading...
