NOTE: Delay function:
After selecting the wash cycle program, you can set the desired delay time by pressing the delay
button. The dishwasher will start operation after the
selected delay time is elapsed.
It can be set up to 24 hour delay time.
table
NOTE: Child safety lock function
To lock, press child lock button and 3 in 1 button at same time and hold for at least 3 seconds.
The child lock indicator will flash 6 times and then illuminate.
To unlock, press child lock button and 3 in 1 button at the same time and hold for at least 3
seconds. The unit will get back to normal standby status and the child lock indicator will switch off.
If you open the door when washing, the machine pauses and sounds warning alarm, it displays E1.
Under different status, the program indicator will light in different combination:
1.
2.
3.
4.
5. Continue to press "program" button to select the desired "wash cycle". (See the section entitled
“ Wash Cycle Table”). Press "start/pause" button to start the program.
Then turn it on by press "power" button again,
Press "start/pause" button to start the washing program.
NOTE : "3 in1" function
"3 in 1" is a special designed program to use the 3 in 1 dishwasher tablet. You can buy the tablet
in the high street. Add the tablet into the detergent box and do not need to fill the salt & rinse-aid.
Press once on the 3 in 1 button and the indicator will illuminate. Then select the washing program
as usual. To have the best result, it is strong suggested to add salt to the salt container for water
softener. (see waster softener section)
Close the door,press the power button.
16
To Next Page
Loading...
