27
or online at www.bush-support.com If you still require further assistance, call one of our experts on 01759 487838
Re
p
lacing the oven lamps
W
AR
N
I
NG: Ensure that the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.
Remove the glass cover of the lamp-holder as shown below.
Remove the lamp and replace with a lamp resistant to high temperatures (300°C) with
the following characteristics:
- Voltage: 220-240V
- Wattage: 25W
- Type: E 14
Replacement lamps are available from our Support Team. Replace
th
e glass cover and reconnect the oven to the mains power supply.
WARNING: Please do not use screwdrivers or other utensils to
remove the light cover. This could damage the enamel of the oven
or the lamp holder lamp holder.
PLEASE NOTE: The bulb replacement is not covered by your
guarantee.
To Next Page
Loading...
