What to do if my Bush TDT110HP won't start?
If your dryer isn't starting, first, ensure it's properly plugged into the socket and that the loading door is fully closed. Confirm that you've set a program and that the dryer isn't in standby (pause) mode. Also, check if the child lock is active and deactivate it if necessary.
How to clean water leaking from Bush TDT110HP Dryer door?
If you notice water leaking from the loading door, it might be due to lint accumulation. Clean the inner surfaces of the loading door and the gasket surfaces to resolve this issue.
What to do if the Bush TDT110HP Dryer door opens by itself?
If the loading door opens on its own, it might not be closed properly. Push the loading door until you hear it click shut.
How to clean the Bush Dryer filter?
If the filter cleaning warning symbol is on, the lint filter might be unclean. Clean the filter. There might also be a layer causing obstruction on the surface of the lint filter, so wash it with lukewarm water. Additionally, the filter seat might be clogged with lint, so wash the filter seat as well.
Why does my Bush Dryer take so long to dry?
Several factors can cause prolonged drying times. The lint filter surface, heat exchanger, or humidity sensor might be clogged, so clean them. Ensure the ventilation grills aren't blocked and the room isn't too hot by opening doors or windows. Avoid overloading the dryer and select a higher spin speed on your washing machine to ensure laundry is sufficiently spun before drying.
What to do if my laundry comes out damp from my Bush Dryer?
If your laundry is coming out damp, there are a few potential reasons. First, laundry that's hot may feel more humid. Second, make sure the program you're using is appropriate for the type of laundry you're drying, checking the care labels and using time programs as needed. Also, a clogged lint filter or heat exchanger can cause this issue, so wash the filter and clean the heat exchanger. Finally, avoid overloading the dryer and ensure your laundry is spun sufficiently by selecting a higher spin speed on your washing machine.
What to do if the Bush Dryer programme has been interrupted?
If your drying program is interrupted, ensure the loading door is properly closed. If there was a power failure, press the Start/Pause key to restart the program. Also, check if the water tank is full and empty it if needed.
Why are my clothes shrinking in my Bush TDT110HP?
Clothes may shrink, felt, or deteriorate if the selected program isn't suitable for the laundry type. Check the care labels on your items and select an appropriate program.
How to fix the Bush TDT110HP water tank warning?
If the water tank warning symbol is on or flashing, the water tank might be full; empty it. Also, if the dryer is connected directly to a water outlet, check the water discharge hose for any bends.
What to do if filter and heat exchanger symbols are flashing on my Bush Dryer?
If the filter and heat exchanger cleaning warning symbols are flashing, it could mean that the filter seat is clogged with lint. Clean the filter. Also, there might be a layer causing obstruction on the surface of the lint filter, so wash the filter with lukewarm water. The heat exchanger might also be clogged, so clean the heat exchanger.
To Next Page
General
