To Next Page
B
Brittney CurryJul 28, 2025
What to do if I can't see anything through my Bushnell Deep Space 78-9003 after setup?
- JJanet CarterJul 28, 2025
If you've completed the setup of your Bushnell Telescope but can't see anything, make sure that the objective lens cover has been removed. Also, try viewing an object that is 200 or more yards away. If your telescope came with multiple eyepieces, start with the lowest power eyepiece (highest number). Finally, use the Rack & Pinion Focusing Mechanism to bring the object into focus.
General
