EasyManua.ls Logo

Bushnell Equinox Z 260130 - User Manual

Bushnell Equinox Z  260130
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
Model #s: 260130 / 260140 / 260150
3x30 / 4.5x40 / 6x50
DIGITAL NIGHT VISION

Questions and Answers

  • D
    Denise HallAug 12, 2025
    What to do if my Bushnell Equinox Z 260130 Monocular does not turn on?
    • L
      Lawrence LamAug 12, 2025
      If your Bushnell Monocular isn't turning on, first, ensure the batteries are correctly installed, paying attention to the polarity (+/-) inside the battery compartment. If that doesn't work, try replacing all the batteries. Also, clean the battery compartment, especially the contact points, to ensure a good connection.
  • S
    Sandra Woodward DDSAug 19, 2025
    What to do if the image is too dark on Bushnell Equinox Z 260130 Monocular?
    • J
      James VaughanAug 19, 2025
      If the observed image through your Bushnell Monocular is too dark, try these solutions. If the ambient light level is too low, activate the Infrared Light by pressing the IR button. Also, press the Image Brightness button to select a lower frame rate from the digital sensor.
  • I
    ihicksAug 27, 2025
    Why is the image blurry on my Bushnell Equinox Z 260130 Monocular?
    • J
      Jessica JonesAug 27, 2025
      If the image in your Bushnell Monocular appears blurry, try these steps: First, adjust the focus by rotating the objective lens. If necessary, fine-tune the diopter setting by rotating the eyepiece until the LCD display edges are sharp. Next, inspect the objective lens and eyepiece for any dirt or smudges and clean them if needed. If the issue persists, try replacing the batteries. In low light, activate the IR illumination to improve clarity.
  • D
    Donald WilsonSep 4, 2025
    Why is the image too bright on my Bushnell Equinox Z 260130?
    • A
      Alexa WalterSep 4, 2025
      If the image through your Bushnell Monocular is too bright, it might be due to high ambient light or the IR light being at its highest setting. If you're using the IR light, press the IR button to select a lower illumination level. Alternatively, turn off the unit or cover the objective lens.

Bushnell Equinox Z 260130 Specifications

General IconGeneral
Digital Zoom3x
Infrared IlluminatorYes
IR Wavelength850 nm
Battery Type4 AA
Battery Life6 hours
Video RecordingYes
Image CaptureYes
Display TypeLCD
ColorBlack
Eye Relief12mm
WaterproofNo
Display Resolution640 x 480
Video OutputYes
Built-in Photo/Video CaptureYes
Night VisionYes
StorageMicroSD Card

Related product manuals