Need help?Do you have a question about the Bushnell Roam Series and is the answer not in the manual?
Simple 2-pole design for quick setup, fitting into an ultra-compact compression sack.
Aluminum poles and durable Ripstop fabric provide strength and withstand tough use.
Water repellent fabric, taped seams, and strong poles protect against rain and wind.
Large mesh walls offer enhanced ventilation and unobstructed views of the night sky.
Vestibule and inner pockets keep gear handy and organized, with an easy-access pocket near the door.
Reflective elements improve visibility for easy tent access in the dark.
Unpack tent, select a level site, and ensure all parts are accounted for before setup.
Connect the sections of the aluminum poles to form the tent's structural frame.
Lay poles diagonally across the tent and insert ends into corner grommets.
Secure inner tent to poles with black hooks and connect top poles with a large black hook.
Use web loops and stakes to secure the four corners of the tent to the ground.
Drape rainfly over tent, aligning sections, and attach buckles and hook-and-loop tabs to poles.
Insert a pole into the rainfly sleeve and connect to grommets to create the vestibule.
Stake vestibule and tie-downs, then connect vestibule floor hooks for stability.
Simple 2-pole design for quick setup, fitting into an ultra-compact compression sack.
Aluminum poles and durable Ripstop fabric provide strength and withstand tough use.
Water repellent fabric, taped seams, and strong poles protect against rain and wind.
Large mesh walls offer enhanced ventilation and unobstructed views of the night sky.
Vestibule and inner pockets keep gear handy and organized, with an easy-access pocket near the door.
Reflective elements improve visibility for easy tent access in the dark.
Unpack tent, select a level site, and ensure all parts are accounted for before setup.
Connect the sections of the aluminum poles to form the tent's structural frame.
Lay poles diagonally across the tent and insert ends into corner grommets.
Secure inner tent to poles with black hooks and connect top poles with a large black hook.
Use web loops and stakes to secure the four corners of the tent to the ground.
Drape rainfly over tent, aligning sections, and attach buckles and hook-and-loop tabs to poles.
Insert a pole into the rainfly sleeve and connect to grommets to create the vestibule.
Stake vestibule and tie-downs, then connect vestibule floor hooks for stability.
This document describes the Bushnell 2 Person Backpacker tent from the ROAMSERIES, Model No. 30189 (Item No. BSN-754548).
The Bushnell 2 Person Backpacker tent is designed for recreational camping, particularly for backpackers due to its compact and lightweight design. It provides shelter for two people in sleeping bags on the ground and is suitable for three seasons (spring, summer, and fall). The tent features a simple 2-pole design for quick setup and includes a rainfly for weather protection. It also incorporates features for enhanced ventilation, gear storage, and nighttime visibility.
A 1-Year Limited Warranty is provided by Bohemian Travel Gear Limited, covering defects in materials or workmanship from the original date of purchase. Replacement parts may be provided at their discretion. An original receipt or proof of purchase and proof of defect are required. Shipping costs incurred outside the continental USA are not covered. The warranty is valid for the original purchaser and is not transferable. It does not cover products purchased through non-authorized dealers or online auction sites. It does NOT cover normal wear and tear, abuse, or misuse, including damage from inclement weather conditions (wind, rain, hail). All replacement products or parts assume the remaining warranty of the original product.
To Next Page
General