Need help?Do you have a question about the Bushnell Shield Series and is the answer not in the manual?
Simple 2-pole design allows for easy setup and takedown.
Special reflective coating blocks UV rays for a darker, cooler tent.
Water repellent fabric and taped seams protect against tough weather.
Mesh windows offer enhanced ventilation and views of the night sky.
Internal and external pockets keep items organized and off the ground.
Reflective elements improve visibility during nighttime.
Unpack tent and lay fabric flat on a clear, level surface.
Connect pole sections and insert large poles into sleeves to form an 'X'.
Insert pole pins and secure tent fabric to poles with clips.
Link poles at the top where they intersect with a black hook.
Set small pole into rainfly pockets and tie to center.
Flip rainfly right-side up and drape over tent, aligning 'B' logo above door.
Attach rainfly buckles and floor mat hooks to secure tent.
Stake corners and tie-downs to secure the tent to the ground.
Remove stakes, detach hook-and-loop tabs and buckles from rainfly.
Detach floor mat, pole clips, and remove poles from sleeves.
Fold tent lengthwise, roll tightly, and store tent, poles, rainfly, mat, and stakes.
Contact for warranty service, repair parts, or product questions.
Covers defects in materials/workmanship for 12 months from purchase.
Keep flame and heat sources away from tent fabric; it is flame-resistant, not fire-proof.
Avoid sprays or chemical treatments that may compromise coatings.
Simple 2-pole design allows for easy setup and takedown.
Special reflective coating blocks UV rays for a darker, cooler tent.
Water repellent fabric and taped seams protect against tough weather.
Mesh windows offer enhanced ventilation and views of the night sky.
Internal and external pockets keep items organized and off the ground.
Reflective elements improve visibility during nighttime.
Unpack tent and lay fabric flat on a clear, level surface.
Connect pole sections and insert large poles into sleeves to form an 'X'.
Insert pole pins and secure tent fabric to poles with clips.
Link poles at the top where they intersect with a black hook.
Set small pole into rainfly pockets and tie to center.
Flip rainfly right-side up and drape over tent, aligning 'B' logo above door.
Attach rainfly buckles and floor mat hooks to secure tent.
Stake corners and tie-downs to secure the tent to the ground.
Remove stakes, detach hook-and-loop tabs and buckles from rainfly.
Detach floor mat, pole clips, and remove poles from sleeves.
Fold tent lengthwise, roll tightly, and store tent, poles, rainfly, mat, and stakes.
Contact for warranty service, repair parts, or product questions.
Covers defects in materials/workmanship for 12 months from purchase.
Keep flame and heat sources away from tent fabric; it is flame-resistant, not fire-proof.
Avoid sprays or chemical treatments that may compromise coatings.
This document describes the Bushnell 4-Person Dome Tent, Model No. 30190 (Item No. BSN-8754F), a recreational tent designed for camping.
The Bushnell 4-Person Dome Tent is designed to provide shelter for up to four people during camping trips. It offers protection from the elements, including sun, rain, and wind, and features various design elements to enhance comfort and convenience for campers. The tent is suitable for three-season use (spring, summer, and fall).
To Next Page
General