Bushranger BRV2600 - User Manual

Questions and Answers

M
Matthew CarlsonAug 2, 2025
Why my Bushranger Blower engine does not start?
- S
  Steven YoungAug 2, 2025
  Several factors can prevent your Bushranger Blower engine from starting. It might be out of fuel, or the fuel could be old (older than 3 months). Other possible causes include a dirty or disconnected spark plug, water in the fuel tank, a blocked inlet grill (on blower vac models), or a dirty air filter. Solutions include filling the tank with fresh 2-stroke fuel (25:1), cleaning or replacing the spark plug, firmly pressing on the terminal cover, draining stale fuel and replacing it with fresh fuel, securing the grill, or cleaning/replacing the air filter. If there is water in the fuel tank, contact an authorised Bushranger™ dealer.
T
Tara BennettAug 11, 2025
What to do if Bushranger BRV2600 engine stops often?
- J
  Juan AvilaAug 12, 2025
  If your Bushranger Blower engine stops frequently, consider these potential causes: a dirty air filter, a blocked fuel supply, a fuel cap that isn't venting properly, or the wrong type of fuel. To resolve this, try cleaning or replacing the air filter, ensuring the fuel line isn't pinched or blocked, clearing the vent hole in the fuel tank cap, or draining the tank and refilling with 2-stroke fuel (25:1).
B
Brittany LyonsAug 22, 2025
How to fix Bushranger Blower when engine looses power?
- F
  fcarpenterAug 22, 2025
  If your Bushranger Blower engine is losing power, the likely culprits are a dirty air filter or blocked fuel cap vent holes. Try cleaning or replacing the air filter, and ensure the vent hole in the fuel tank cap is clear.