To Next Page
D
dmossJul 28, 2025
What to do if my Bushranger Max Air III 55x23 Air Compressor will not run?
- Vvincent53Jul 29, 2025
If your Bushranger Air Compressor won't run, first, ensure the compressor switch is in the “On” position. If that doesn't work, the fuse may be blown; disconnect the compressor from the power source and replace the fuse, referring to the Specifications section for the correct fuse type. It's also possible the motor overheated; let the compressor cool off for about 15 minutes to allow the thermal overload switch to reset. Finally, high pressure might be the issue; hold down the trigger on the gun to release pressure.
General
