Bushranger Black Max 55X12

Questions and Answers

J
jon69Jul 28, 2025
What to do if my Bushranger Air Compressor will not run?
- S
  smithmichaelJul 28, 2025
  If your Bushranger Air Compressor isn't running, there could be a few reasons. First, ensure the compressor switch is in the “On” position. If that's not the issue, check the fuse and replace it if it's blown, after disconnecting the compressor from the power source. Also, the motor may have overheated; let the compressor cool off for about 15 minutes to allow the thermal overload switch to reset.
M
michaeljohnsonAug 5, 2025
Why does my Bushranger Air Compressor Thermal Overload Protector cut out repeatedly?
- B
  benjaminbennettAug 5, 2025
  The thermal overload protector in your Bushranger Air Compressor might be cutting out repeatedly due to a lack of proper ventilation or high ambient temperature. Try moving the compressor to a well-ventilated area or an area with a lower ambient temperature. Alternatively, the compressor valves may have failed, requiring you to replace the compressor.
C
Christine WarrenAug 11, 2025
What to do if my Bushranger Air Compressor air flow is lower than normal?
- P
  pbakerAug 11, 2025
  If your Bushranger Air Compressor's airflow is lower than normal, or it can't pump to higher pressures, it could be due to worn piston ring or inlet valves. In this case, the suggested solution is to replace the compressor.
B
bryanjamesAug 19, 2025
How to fix excessive knocking or rattling in my Bushranger Air Compressor?
- M
  Margaret PorterAug 19, 2025
  Excessive knocking or rattling in your Bushranger Air Compressor could be due to a worn bearing on the eccentric or motor shaft, or a worn cylinder or piston ring. The suggested solution for both of these issues is to replace the compressor.