BUTSIR ELEGANCE Series

Questions and Answers

C
Courtney MathewsAug 6, 2025
Why is my BUTSIR ELEGANCE Refrigerator not cold enough?
- N
  nealsydneyAug 6, 2025
  Your BUTSIR Refrigerator might not be cooling adequately due to several reasons: the fireplace and burner may be dirty (perform the cleaning process as detailed in the operating instructions), the doors may not be closing properly (check the door seals), the temperature selector might be set too low (increase the temperature setting), the refrigerator might lack sufficient ventilation (relocate the appliance according to the manual's instructions), or the refrigerator might not be level (relocate the appliance according to the manual's instructions).
A
Amy BoltonAug 12, 2025
What to do if my BUTSIR Refrigerator makes lot of ice in the interior?
- M
  Michelle GrimesAug 12, 2025
  If your BUTSIR Refrigerator is forming excessive ice, it could be due to the doors not sealing correctly (check the door seals), a need to defrost the refrigerator (follow the defrosting procedure), or uncovered liquids inside (use airtight containers).
B
Brian ChavezAug 18, 2025
How to fix BUTSIR ELEGANCE Refrigerator that shuts off or produces much smoke/odor?
- E
  Eric FranklinAug 18, 2025
  If your BUTSIR Refrigerator shuts off, or produces excessive smoke or odor, it is likely that the tube and burner are dirty. Perform the cleaning process as detailed in the operating instructions.
K
Krystal FrancoAug 25, 2025
What to do if the flame does not ignite on my BUTSIR Refrigerator?
- W
  whitemariaAug 25, 2025
  If the flame on your BUTSIR Refrigerator isn't igniting, it could be due to several reasons: the gas cylinder might be empty (replace the bottle), the gas regulator might be closed (turn on the gas), there might be no spark (check that the spark plug has not moved or is very dirty), or the burner might be dirty (carry out the cleaning process).
W
weisspatrickAug 30, 2025
Why the flame is not steadily lit on my BUTSIR ELEGANCE Refrigerator?
- K
  Kimberly MorenoAug 30, 2025
  If the flame on your BUTSIR Refrigerator isn't steadily lit, it could be because the thermocouple is dirty or corroded (clean it with a toothbrush or scouring pad), or the thermocouple has moved (bring the tip of the thermocouple to about 2 mm from the mesh of the burner).

Summary

Butsir Refrigerator Introduction

Safety and Usage Recommendations

Critical safety precautions, operational guidelines, and recommendations for safe refrigerator use.

Transport Damage Reporting

Procedure to inspect the refrigerator for damage upon delivery and report issues within the specified timeframe.

Installation and Operational Guidelines

Electrical Grounding

Instructions for connecting the appliance's grounding plug to a grounded receptacle for electrical safety.

Ventilation Requirements

Guidelines on necessary ventilation openings for gas refrigerators to ensure proper air consumption.

Appliance Usage and Servicing

Rules for correct appliance use, shutting off gas for service, and the need for certified technicians.

Leveling the Refrigerator

Visual guide and instructions for ensuring the refrigerator is correctly leveled for optimal performance.

Initial Setup and Gas Installation

Start-Up Cleaning Procedure

Recommended method for cleaning the refrigerator's interior with warm water and detergent before first use.

Gas System Connection

Detailed steps for authorized personnel to connect the gas pipe, regulator, and cylinder.

Ignition and Gas Operation

Piezo and Battery Ignition

Explanation of the two ignition systems (Piezo and Battery) used to start the refrigerator.

Gas Leak Detection Safety

Emphasizes using soapy solution for leak detection, warning against open flames.

LP Gas Compatibility

Clarifies that the refrigerator is designed for LP gas and not for town or natural gas.

Temperature Control and Door Adjustment

Thermostat Operation

Guide on adjusting the thermostat knob to control the refrigerator's internal temperature.

Procedure to Turn Off

Steps for safely shutting down the refrigerator for extended periods of non-use.

Reversing Door Swing

Optional instructions for changing the direction of the refrigerator door's opening.

Internal Features and Defrosting

Interior Lighting System

How the interior light works and the process for replacing batteries or the bulb.

Making Ice Cubes

Instructions for filling the ice tray and temporarily increasing cooling for faster ice production.

Defrosting the Refrigerator

Guidance on when and how to defrost, including warnings about food and appliance damage.

Cleaning and Maintenance Procedures

General Cleaning Advice

What cleaning agents to avoid and recommended methods for cleaning the appliance.

Burner Assembly Cleaning

Detailed steps for cleaning the burner, electrode, and thermocouple for optimal gas operation.

Chimney System Maintenance

Instructions for cleaning the chimney to prevent carbon monoxide buildup and ensure safety.

Troubleshooting and Maintenance Tips

Pre-Service Troubleshooting Checks

Essential checks for common issues like leveling, ventilation, and gas supply before calling service.

Gas Bottle Replacement

Step-by-step guide for safely changing the gas cylinder connected to the refrigerator.

Scheduled Maintenance

Recommendations for periodic inspections by a technician to ensure long-term reliability.

Detailed Troubleshooting Table

Warranty and Reference Information

Warranty Certificate Completion

Information required for the dealer to complete the warranty certificate and contact details.

Product Reference Data

Fields for recording essential product details for future reference and warranty service.

Guarantee Terms and Conditions

Warranty Coverage and Exclusions

Details on what the warranty covers, its duration, and common situations not included.

Transport Damage Claims Procedure

Steps for reporting and claiming damages that occurred during the product's transit.

Correct Product Disposal