Büttner Elektronik Solarregler MT 230-PP

Need help?

Do you have a question about the Büttner Elektronik Solarregler MT 230-PP and is the answer not in the manual?

Summary

Battery Charging Configuration

Main Battery Charging Programs

Charging programs for Lead, AGM, Gel, and LiFePO4 batteries.

Safety and Application Guidelines

General Safety Regulations

Important safety rules and recommended practices for operation.

Appropriate Application Restrictions

Connection Plan and Cable Requirements

Wiring Diagram Overview

Visual guide for connecting solar panels, batteries, and accessories.

Cable Specification Guide

Installation and Connection Procedures

Mounting Instructions

Guidance on securely mounting the solar controller in a suitable location.

Board Battery Connection

Step-by-step instructions for connecting the main battery.

Solar Panel Connection

System Configuration and Safety Features

Temperature Sensor Integration

Battery Protection Modes

Safety modes for battery protection against extreme temperatures.

LED Indicators and Operating Instructions

Understanding LED Indicators

Battery Lifetime and Care

Overvoltage Protection Mechanisms

Details on overvoltage protection and limitation features.

Detailed Charging Programs

Lead Acid and AGM Charging

Specific charging parameters for Lead Acid and AGM batteries.

LiFePO4 Battery Charging

Specific charging parameters for LiFePO4 batteries.

LiFePO4 Battery Specific Charging

LiFePO4 14.4 V and 14.6 V Charging

Charging parameters for LiFePO4 batteries at 14.4V and 14.6V.

LiFePO4 14.7 V Charging

Charging parameters for LiFePO4 batteries at 14.7V.

Charging Process Phases

Charging Phase Indications

Detailed Charging Phases

Charging Process Visualization

IU10 U2 Charging Curve

Charging Phase Breakdown

Technical Specifications

Model-Specific Data