Büttner Elektronik MT iQ Solar Pro

Need help?

Do you have a question about the Büttner Elektronik MT iQ Solar Pro and is the answer not in the manual?

Summary

Introduction

General Information and Safety

Safety Instructions

Manufacturer's liability disclaimer for improper handling and non-compliance with safety precautions.

Supply Voltage and Moisture Protection

Details the device's supply voltage requirements and protection against moisture.

Product Description

Installation Guide

Current Sensor Installation

Step-by-step guide to installing the current sensor and routing cables through it.

Connecting Cables and Power

Instructions for connecting the current sensor extension, power supply cables, and data cable.

Overall Circuit Diagram

Device Adjustments and Calibration

Calibrating Maximum Solar Power

Explains how to calibrate the maximum solar power display using the "Reset 100%" function.

Resetting and Voltage Display Settings

Details procedures for resetting cumulated solar charge, zero-calibrating the sensor, and managing voltage display.

Operating the Solar Remote Display

Quick Overview and Switching

Overview of device operation and how to switch it on/off and manage standby.

Displaying Solar Current and Power

Details displaying actual solar current (A) and solar power (%).

Displaying Battery Status

Explains how to view battery voltage (V) and charged capacity (Ah).

Technical Data

Warranty Information