EasyManua.ls Logo

Buyers Products Company LT45 User Manual

Buyers Products Company LT45
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.buyersproducts.com
Phone (440) 974-8888
Fax 800-841-8003
1
Installation Instructions
LT45
Multi-Purpose Basket
INSTALLATION
1. Building the Basket (Fig 1, 2 and 3)
a. Attach the Side Panels to the Bottom Panel using the
3/8"-16 Carriage Bolts and Flange Nuts.
b. Attach the Front and Rear Panels to the Side Panels
using 3/8"-16 Carriage Bolts and Flange Nuts.
c. Insert the Dividers to desired locations and loosely
attach with 3/8"-16 Hex Head Cap Screws (HHCS) and
Nylon Locking Nuts.
Note: Dividers can be set in different locations along
the inside of the basket. Use the side bolt pattern to
customize your basket to fit your specific needs.
BEFORE YOU BEGIN INSTALLING:
1. Read and understand these instructions completely.
2. Verify that you have received all the parts listed in the bill of
materials for your model number.
Note:
The multi-purpose basket comes in two boxes.
Tools Required:
(2) 9/16" Wrenches and/or Sockets
Electric Drill
(1) 3/8" Drill Bit
Tape Measure
CAUTION
Always wear safety glasses when using power tools.
WARNING
Check for locations of brake lines and electrical wiring
etc., before drilling any holes. Any damage to trailer during
installation is installer’s full responsibility.
continued
1
Fig. 1
Fig. 2
Fig. 3
Question and Answer IconNeed help?

Do you have a question about the Buyers Products Company LT45 and is the answer not in the manual?

Buyers Products Company LT45 Specifications

General IconGeneral
BrandBuyers Products Company
ModelLT45
CategoryIndustrial Equipment
LanguageEnglish

Summary

Preparation and Safety

Safety Precautions

Advisories on safety glasses use and pre-installation checks for wiring and brake lines.

Tools Required

List of essential tools needed for the installation process.

Basket Assembly

Building the Basket

Steps to attach side, front, rear, and divider panels to form the basket structure.

Mounting to Trailer

Attaching Legs

Unfolding and securing the preassembled legs to the basket using hardware.

Trailer Mounting Procedure

Process of measuring, positioning, and fastening the basket assembly to trailer rails.

Optional Accessories

Blower Holder and Trimmer Line Spool Bracket Installation

Guidance on installing optional brackets for accessories like blower holders and trimmer line spools.