What to do if my BV BV-RH-801 Ventilation Hood or LED light does not operate after installation?
If your BV Ventilation Hood or LED light isn't working post-installation, ensure the hood is plugged in and that power is turned on. Check that fuses haven't blown and all electrical wiring is properly connected. To check if the light bulbs are defective, swap the light assembly with working ones.
General| Material | Stainless steel |
|---|---|
| Number of motors | 1 |
| Noise level | 65 dB |
| Lighting | LED |
| Width | 30 inches |
Crucial safety warnings before installation and operation to prevent hazards.
Key precautions for safe installation of the range hood.
Guidelines to minimize risks of fire, electric shock, and personal injury.
Measures to prevent and manage stove top grease fires.
Procedures to follow in case of a gas leak.
Explanation of the safety alert symbol and its meaning.
Specifies the required height for range hood venting.
Critical warnings regarding exhaust termination and duct sealing.
Emphasizes compliance with electrical codes and ordinances.
Detailed instructions for securely mounting the range hood.
Important cautions for safe and proper operation of the range hood.
Warning regarding electrical hazards during servicing.
To Next Page