COSMY 100 / 150 / 200 / 250 ROBOTIC POOL CLEANERS COSMY 100 / 150 / 200 / 250 ROBOTIC POOL CLEANERS
English
English
Using the App
Information
Shows information about your
Robotic Cleaner. Pull down to
refresh the readings.
Remote Control
Hold down the RIGHT
or LEFT icons to turn
the robot. Use single-
tap on the CHANGE
DIRECTION Icon to
change the driving
direction of the pool
Cleaner.
Language: Choose
your preferred
interface language.
Starting the Robotic
Cleaner using the App :
1. Download and install the
Application from Google Play
(Use the below QR code on
the back of the manual)
2. Open the COSMY App.
3. Open Bluetooth option on
your phone.
4. The APP will present the
discovered robots in its range
(RoboCleaner xxxxxx).
5. Tap on robot's name. The
APP will connect to your
power supply. The Bluetooth
icon on the power supply unit
will light up to indicate correct
match.
6. To activate the cleaner, tap
the On/off icon on the App.
Using the App
Alerts
Shows different alerts
received from the
Robotic pool Cleaner
or the Power Supply.
For required action
for each alert – see
Trouble Shooting
section.
Settings
Change the settings of the Pool
Cleaner:
Delay Start (in hours): The Pool
Cleaner will start the cleaning cycle
after the chosen period of time.
Operation Time: The Pool Cleaner
will clean the pool according to the
chosen cycle time:
- 1.5 hours, floor only cleaning
- 2 hours, floor and wall cleaning
- 2.5 hours, floor and wall cleaning
Work Interval: The Pool Cleaner will
start working automatically every
48/72/96 hours. (Choosing this option
will cancel the Delay time)
Pool Properties: Choose Shape
and Surface according the pool
parameters.
6
7
To Next Page
Loading...
Need help?
General
