BWT COSMY THE BOT 100 User Manual

COSMY THE BOT | 100 | 150 | 200 | 250 | ROBOTIC POOL CLEANERS COSMY THE BOT | 100 | 150 | 200 | 250 | ROBOTIC POOL CLEANERS
English
Introduction
Cart
(optional)
Power
supply
Robotic
pool
cleaner
Components
Power
cable
System overview
The robotic cleaner sweeps the pool oor and walls collecting dirt and
debris in its lters. This user manual explains how to operate the robotic
cleaner, including cleaning, maintenance and storage procedures.
Note: This manual reviews several di󰀨erent models with variations in
components.
Robotic cleaner operation
Once the robotic cleaner is placed in the pool and activated, it operates
according to its program. It moves along the oor and walls of the
pool, covering the entire area of the pool oor and walls. When it has
nished its program, it remains inactive on the pool oor. Power will
automatically shut o󰀨. Note: It's not recommended to stop the pool
cleaner prior to cycle end.
Note: Wall climbing is an optional feature. When the wall climbing
feature is enabled, the robotic cleaner climbs the wall at intervals
according to its internal program. Its ability to climb over stairs in
swimming pool is subject to stair geometry and material.
Operating conditions
The robotic cleaner is intended for use in residential swimming
pools only and in the following conditions: (1) Recommended water
temperature 22°C-32°C (72°F-90°F). (2) Water pH : 7.2 - 7.6 (3)
Chlorine level: pool is maintained according to the pool manufacturer’s
instructions. (Recommended Chlorine level: 2-4 ppm) Note: Failure to
maintain the pool according to the recommended operating conditions
could prevent the robotic cleaner from functioning properly.
2

BWT COSMY THE BOT 100 Specifications

General

Brand	BWT
Model	COSMY THE BOT 100
Category	Swimming Pool Vacuum
Language	English