To Next PageTo Next Page
Need help?Do you have a question about the BWT E1 3/4" Series and is the answer not in the manual?
General| Brand | BWT |
|---|---|
| Model | E1 3/4" Series |
| Category | Water System |
| Language | English |
Lists all parts included with the BWT E1 filter and pressure reducer.
Lists filter elements and hygienic vaults available for separate purchase.
Explains the BWT E1's function in filtering drinking and service water.
Details the pressure reducer's role in domestic water supply, saving water and reducing noise.
Describes how water flows through the filter element, retaining particles.
Explains the pressure reducer's operation and the backflow preventer's function.
Covers local regulations, general guidelines, and technical data for installation.
Warns about frost, disruptive influences, and chemical exposure at the installation site.
Step-by-step guide on how to check and change the water flow direction.
Instructions for mounting the filter, including screw connections and backflow preventer placement.
Details on how to install the pre-installed wall mounting using supplied hardware.
Guide on how to adjust the pressure reducer settings using the rotary knob.
Instructions for inserting batteries into the electronic filter change display.
Step-by-step guide for replacing the filter element and checking batteries.
Explains the LED indicator for filter replacement and its flashing signals.
Procedure for replacing batteries in the filter change display when depleted.
Guidelines for proper disposal of used batteries, emphasizing environmental responsibility.
How to check the LED display and battery status by pressing the reset button.
Outlines the need for regular servicing and filter element replacement for proper function.
Specifies the requirement for checking initial pressure every 2 months for zero flow conditions.
Details how to proceed with warranty claims, contacting service centers.
Recommends entering into a maintenance contract for ongoing support and warranty.
Important safety note advising that filters should not be operated by children.
Lists common defects like reduced water pressure and their causes.
Provides solutions for identified defects, including part replacement.
States compliance with DIN EN 13443-1 and other relevant technical regulations.
Lists key regulations like DIN EN 806-5 and drinking water quality rules to be heeded.
Emphasizes the importance of hygienic care during maintenance operations.
States that maintenance must be performed by experts according to DIN EN 806-5.
Lists wearing parts like seals and elements with their recommended replacement intervals.
Provides detailed technical specifications for BWT E1 filter models.
Lists physical dimensions, installation distances, and operating weight for the devices.
Includes item numbers for AT and DE, as well as EAN codes for ordering.
