EasyManua.ls Logo

BYD F3/F3R - Tire Change and Wheel Procedures

BYD F3/F3R
233 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
F3/F3R OWNERS MANUAL
- 156 -
Below shows the connecting point:
The joint of jump starting engine
Do not connect the cable to or near any part
that moves when the engine is cranked.
CAUTION
For connections, to avoid serious
injury, do not lean over the battery or
accidentally let the jumper cables or
clamps touch anything except the
correct battery terminals or the ground.
5. Run the engine in the vehicle with the
booster battery at about 2000 rpm with
the accelerator pedal lightly pressed.
6. Carefully disconnect the cables in the
exact reverse order: the
negative cable and then the positive
cable.
7. Carefull
y
dispos
e
of the clot
hs covering
the battery: they may now contain
sulfuric acid.
8. If removal is needed, put all plugs of
battery back to its initial position.
If the reason of your battery discharging is not
apparent (for example, lights left on), you
should have it checked at your BYD AUTO
service station.

Table of Contents

Related product manuals