F3/F3R OWNER’S MANUAL
- 62 -
(position 1)
Pull the lever all the way back. The flashing
high beam of headlights will turn off when you
release the lever.
The headlight high beam indicator light (blue
light) on the instrument panel will tell you that
the high beams are flashing.
You can flash the high beam headlights with
the knob turned to “off”.
Turn signal lights
To signal a turn, push the left
multi-function switch up or down to
position 1.
The key must be in the “ON” position.
The lever automatically returns after you
make a turn. But you may have to return it by
hand after you change a lane.
To signal a lane change, move the lever up or
down to the pressure point (position 2) and
hold it.
If the turn signal indicator lights (green lights)
on the instrument panel flash faster than
normal, it means that a front or rear turn
signal bulb is burned out.
Headlights and turn signal lights (with
automatic light control system---optional)
Headlights
To turn on the following lights, turn the
light adjusting switch: Position 1: position
lights, license plate and instrument panel
lights.
The indicator light (green light) for position
Flashing the high beam of headlights
To Next Page
Loading...
