Byer of Maine Pangean Glider User Manual

Pangean Glider
Assembly Instructions
Important Note:
We are a Maine based company and deeply commited to supporting you with this assembly.
PLEASE give us a call if we can help in any way. As you assemble, be sure NOT to fully tighten the
fasteners until you have inserted the last of 14 screws. This provides exibility and eases assembly.
Contact us for any help:
Byer of Maine
74 Mill St. Orono, ME 04473 USA
Phone: 207-866-2171
Email: comfort@byerofmaine.com
www.byerofmaine.com
Step 2
Assemble lower narrow crossrail
and install 2 screws loosely tightened
One screw,
each end
Step 1
Set the two frame assemblies side
by side with rounded parts up. Assemble
TOP (Short) crossrail and install 4 screws
loosely tightened
install with wider
groove UP
Two Screws,
each end

Byer of Maine Pangean Glider Specifications

General

Brand	Byer of Maine
Model	Pangean Glider
Category	Outdoor Furnishing
Language	English

Summary

Pangean Glider Assembly

Prepare Frame Assemblies

Set two frame assemblies side by side and attach the TOP crossrail loosely.

Attach Lower Crossrail

Assemble the lower narrow crossrail and loosely tighten 2 screws.

Open Frame Structure

Stand the frame upright and pull it open toward you as illustrated.

Install Tapered Crossrail

Assemble tapered crossrail with logo facing up and loosely tighten 4 screws.

Attach Slotted Crossrail & Tighten

Attach the long slotted crossrail and then tighten all 14 screws.

Install Seat Cover

Thread the cover through the frame, insert dowel, and secure it.