byer Pangean Glider User Manual

The Byer Manufacturing Co.
74 Mill Street PO Box 100
Orono, ME 04473 USA
Phone 800-338-0580 Fax 207-866-3529
www.byerofmaine.com
Pangean Glider
Inner Frame Assy.
Wide side of groove
should be up
Outer Frame Assy.
Wide side of groove
should be up
Assembly Instructions
Outer
Frame
Parts
Inner
Frame
Parts
Lower
Link Bars
Upper
Link Bars
Assemble Outer Frame
with 6 - Screws
Assembly
Fasteners
Chair Cover
Cover Dowels
Fastener List
with Key Numbers
Key #
1
3
2
Assemble Inner Frame
with 8 - Screws
STEP
ONE
STEP
TWO
Hint! Steps one to four should be done
on the floor or other large flat surface
If you have a problem, we want to help you
DO NOT return to the retailer until you have sought our help
Contact us – You will find us very responsive!
comfort@byerofmaine.com
Screw M7 x 60mm (14 pcs)
Bolt M8 x 40mm (8 pcs)
Plastic Washer (8 pcs)
Allen Key (1 ea.)
1
1
Allen Driver (1 ea.)
(for use in drill/screwgun)

byer Pangean Glider Specifications

General

Brand	byer
Model	Pangean Glider
Category	Indoor Furnishing
Language	English

Summary

Assembly Steps

Step One: Outer Frame Assembly

Assemble the outer frame parts using six M7 x 60mm screws.

Step Two: Inner Frame Assembly

Assemble the inner frame parts using eight M7 x 60mm screws.

Inner Frame and Link Bar Assembly

Step Three: Upper Link Bars

Assemble two upper link bars to the Long Frame using bolts and washers.

Step Four: Lower Link Bars

Assemble two lower link bars to the Long Frame using bolts and washers.

Step Five: Frame Halves Connection

Join the outer and inner frame halves, aligning link bar holes.

Step Six: Fabric Cover Installation

Slide fabric cover through rails, insert dowels, and secure.