Need help?Do you have a question about the BYK haze-gard plus and is the answer not in the manual?
General| Brand | BYK |
|---|---|
| Model | haze-gard plus |
| Category | Measuring Instruments |
| Language | English |
Describes the initial connection, voltage check, and configuration of the haze-gard plus instrument.
Details the instrument's self-diagnostic test, startup display, and warm-up sequence.
Explains the function of the control panel buttons for selecting parameters and starting measurements.
Covers using test standards, their cleaning, and importance for accurate instrument calibration.
Details changing calibration values and specific calibration steps with the Taber Abrasion Holder.
Provides detailed explanations for each function within the SET-UP menu, including parameters and settings.
Defines statistical terms (mean, std dev) and covers saving, deleting, and managing measurement data.
Explains how material properties like scattering affect visual appearance, defining haze and clarity.
Details the instrument's measurement principle, integrating sphere use, and relevant industry standards.
Provides step-by-step instructions for safely replacing the instrument's lamp unit, including cooling and securing.
Details the procedure for replacing fuses, emphasizing safety and correct fuse type.
Outlines the serial interface, transfer rate, data format, and control commands for PC communication.
Explains PC control, data transmission, language settings, and status reporting via the interface.
Lists key technical parameters, measuring ranges, resolution, repeatability, and physical dimensions.
Lists common error messages, their causes, and provides solutions for troubleshooting instrument issues.
To Next Page
