The JetPack Cordless Induction Charged Sprayer is a commercial-grade backpack sprayer designed for both indoor and outdoor use. It utilizes patented Induction Charged Technology™ to enhance spray coverage, making it effective for sanitization and disinfection. The device is powered by ByoPlanet, ensuring compatibility with their approved products.
Function Description:
The JetPack sprayer is designed to apply liquid products, primarily disinfectants and sanitizers, to surfaces. Its core functionality revolves around the Induction Charged Technology, which imparts an electrostatic charge to the spray droplets. This charge causes the droplets to repel each other and seek out surfaces to adhere to, resulting in more uniform coverage, including hard-to-reach areas and the undersides of objects. The sprayer is intended for commercial use, emphasizing efficiency and thoroughness in application. It operates as a backpack unit, allowing for mobility and ease of use in various environments. The system includes a spray wand for directed application and a tether that must be attached and contacting the ground during operation to manage induction charge accumulation.
Important Technical Specifications:
- Voltage: 24V
- Hose Length: 5 ft. (1.52 m)
- Dimensions (Backpack): 21.2 in x 12 in x 6.5 in (53.8 cm x 30.5 cm x 16.5 cm)
- Weight - Empty: 24 lbs (10.9 kg)
- Weight - Full: 33 lbs (14.9 kg)
- Shipping Weight: Unit: 23 lbs, Battery Kit: 7 lbs
- Flow Rate: 80-90 mL/min
- Product Container Capacity: 1-Gallon (3.8 Liters)
- Battery Type: 24V Lithium Ion Battery
- Operating Temperature Range: 40°F to 100°F (4.5°C to 38°C)
Usage Features:
- Backpack Assembly: The main unit is a backpack designed for portability. It features a soft-textured handle for comfort, a 1-gallon product container, and an electrical compartment housing major electrical components.
- Harness Assembly: The harness is designed for ergonomic fit and comfort, featuring breathable padded back support, shoulder straps, sternum strap, and waist strap. It is adjustable to fit different operator sizes, ensuring weight is concentrated on the hips rather than shoulders.
- Spray Wand Assembly: The wand includes a main control panel, main power button, and an Induction Charged and Spray Button. It connects to the backpack via a loom assembly that carries electrical, liquid, and air lines. The nozzle assembly is located at the front of the sprayer. A lanyard is provided for clipping the wand to the backpack for temporary storage.
- Battery Module: Houses a 24V Lithium Ion battery with an ON/OFF switch, charging port, and a state of charge indicator (LEDs). The battery is removable for charging.
- Charger Assembly: A dedicated charger plugs into a 110V wall outlet and connects to the battery's charging port. It features a charge status LED (red for charging, green for fully charged).
- Tether Assembly: A crucial safety feature, the tether must be attached to the base of the backpack and contact the ground during operation. This helps dissipate accumulated induction charge, preventing shocks or sparks.
- Diagnostic Center: Equipped with LED lights to provide information for quicker and more accurate issue diagnosis by customer service.
- Hour Meter: Logs the running time of the sprayer to ensure proper maintenance scheduling.
- Product Compatibility: Exclusively designed for use with ByoPlanet®-approved products. Using non-approved products voids the warranty and may cause harm.
- Priming: The sprayer requires priming before initial use or after changing product containers to ensure a steady flow of solution.
- Operation: The main power button on the wand initiates power to the system, and the spray button activates the liquid spray. The Induction Charge indicator ring illuminates blue when active.
- Spray Distance: Optimal spray distance is 2-4 feet (0.6-1.2 meters) from surfaces.
- Safety Precautions: Emphasizes the importance of reading the manual, wearing appropriate Personal Protective Equipment (PPE), avoiding flammable chemicals, and ensuring proper ventilation. It also warns against operating the sprayer if fatigued or under the influence.
Maintenance Features:
- Air Filter: A replaceable air filter is located at the bottom of the backpack. It needs to be replaced every three months or 300 operating hours, as indicated by the hour meter. Spare filters are included with the sprayer.
- Cleaning: Regular cleaning of the sprayer is recommended. For external surfaces, a 70% isopropyl alcohol cleaner applied manually with a cloth is suggested.
- Spray Wand Assembly: The spray wand is not field serviceable. Any attempt to disassemble it voids the warranty. For cleaning, 70% isopropyl alcohol can be manually applied to the exterior.
- Backpack Assembly: Similar to the spray wand, the backpack assembly has no serviceable parts inside. Opening the housing voids the warranty. External cleaning with 70% isopropyl alcohol is recommended.
- Battery Assembly: The battery assembly is not field serviceable. For optimal battery life, the battery pack should be recharged every 3 months if in long-term storage.
- Daily Checks: Users are advised to check hoses, tubes, couplings, and the sprayer for wear or damage daily and replace worn or damaged parts immediately.
- Storage: The sprayer should be stored indoors in a cool, dry place, between 40°F and 100°F (4.5°C and 38°C), and in an upright position to prevent leaks. The battery should not be stored in extreme heat or cold.
Need help?
General
To Next Page