C. Crane SoftSpeaker-3 - Softspeaker 3 Usage and Specifications; How to Use Your Softspeaker; Technical Specifications

TM
SOFTSPEAKER 3
AMPLIFIED PILLOW SPEAKER
CAUTION! - Continuous use at high volume may damage hearing
1. Make indent in your pillow
2. Place SoftSpeaker on indented area with pocket side down
3. Connect plug to standard 1/8” (3.5mm) headphone jack on audio source
(Radio, Phone, Tablet, TV, Computer, Etc.)
Specications:
Sensitivity: 115 dB
Frequency: 20-20,000 Hz
Impedance: 32 Ohm
Cable length: 78”
Driver unit: 38mm
Warranty: 1 Year
Specications are subject to change without notice.
Copyright 2017 by C. Crane Company, Inc., Fortuna, CA 95540 All rights reserved. No part of the booklet may be reproduced, in any form or means whatsoever,
without permission in writing from C. Crane Company Inc.