C-LOGIC 900-TC - Time Setting; Automatic Programming

13
Mode Explanation
Temporary
manual mode
Under automatic mode and unlock state, when acting on the keys
and to
adjust the setting temperature, the thermostat will enter into the temporary
manual mode. This temporary mode works to next interval when it will return to
the automatic mode. If you want to return to manual or automatic mode, please
press the key once or twice respectively.
Holidays
mode
Press the key for 3 seconds in order to enable and set the holday mode. Select
ON to enable the holiday mode and press the key to con rm. Then adjust the
number of days (countdown until returning to automatic mode) and prees the key
to con rm. Finally adjust the setting temperature and press the key to
con rm and exit to main screen. To cancell the holiday mode, return to the holiday
setting screen, select OFF and press the key .
Time setting
Press the key to enter into the time setting menu.
Firstly, minutes are fl ashing. Adjust the minute value and press the key to con rm. Then, hours are
fl ashing. Adjust the hour value and press the key to con rm. Finally weekday is fl ashing. Select the
current weekday and press the key to con rm and exit from the time setting menu.
Automatic programming
The programmable thermostat offers the possibility of set an automatic 6 period program. In the
advanced options, it is possible to select the kind of program in function of number of working days
and weekend between 3 possibilities: 5+2 (by default), 6+1, 7.
Press the key to enter into the automatic program-setting menu. Then adjust the initial time
and temperature for the  rst period. Press the key to con rm every parameter. When those
parameters are con rmed, the next period is displayed until the whole program is set.
By default, the program is set as indicated below:
Period Icon Default initial time Default temperature
5 working days + 2
weekend
1 06:00 20ºC
2
08:00 15ºC
3 11:30 15ºC
4
13:30 15ºC
5 17:00 15ºC
6
22:00 15ºC