Specifications
Model
Specification
6” TFT color w/
base features
6” TFT color w/
full features
7” TFT color w/
base features
7” TFT color w/
full features
8” TFT color w/
full features
10” TFT color w/
full features
12” TFT color w/
full features
15” TFT color w/
full features
Part Number
EA9-T6CL-R EA9-T6CL EA9-T7CL-R EA9-T7CL EA9-T8CL EA9-T10CL EA9-T12CL EA9-T15CL
Display Actual Size and
Type
5.7” TFT color 7.0” TFT color 8.4” TFT color 10.4” TFT color 12.1” TFT color 15.0” TFT color
Display Viewing Area
4.54” x 3.40”
[115.2 mm x 86.4 mm]
6.00” x 3.60”
[152.4 mm x 91.4 mm]
6.71” x 5.03”
[170.4 mm x 127.8 mm]
8.31” x 6.24”
[211.2 mm x 158.4 mm]
9.69” x 7.26”
[246.0 mm x 184.5 mm]
11.97” x 8.98”
[304.1 mm x 228.0 mm]
Weight
1.56 lb (710g) 1.59 lb (720g) 1.46 lb (660g) 1.48 lb (670g) 2.93 lb (1330g) 4.19 lb (1900g) 4.89 lb (2200g) 6.50 lb (2950g)
Display Resolution
320 x 240 (QVGA) 800 x 480 (WVGA) 800 x 600 (SVGA) 1024 x 768 (XGA)
Display Brightness
280 nits (typ) 350 nits (typ) 310 nits (typ) 280 nits (typ)
LCD Panel Dot Pitch
0.18 mm x 0.18 mm 0.19 mm x 0.19 mm 0.213 mm x 0.213 mm 0.264 mm x 0.264 mm 0.3075 mm x 0.3075 mm 0.297 mm x 0.297 mm
Color Scale
65,536 colors
Backlight Average
Lifetime*
50,000 hours @ 25 °C
Touch Panel Type
Four-wire analog resistive
Project Memory
26 MB 82 MB
Number of Screens
Up to 999 screens – limited by project memory
Realtime Clock
Realtime Clock Built into panel, backed up for 30 days at 25°C
Calendar -
Month / Day / Year
Yes - monthly deviation 60 sec (Reference)
Serial Port 1
15-pin D-sub female - RS232C, RS-422/485
Serial Port 2
N/A 3-wire terminal block - RS-485 N/A 3-wire terminal block - RS-485
Serial Port 3
N/A RJ-12 modular jack - RS-232C N/A RJ-12 modular jack - RS-232C
USB Port - Type B
USB 2.0 High speed (480 Mbps) Type B - Download/Program
USB Port - Type A
USB 2.0 High speed (480 Mbps) Type A -for USB device options
Ethernet Port
N/A Ethernet Port Ethernet 10/100 Base-T, auto MDI/MDI-X
Audio Line Out
N/A
3.5 mm mini jack – requires
amplifier and speaker(s)
N/A 3.5 mm mini jack – requires amplifier and speaker(s)
Mic In
N/A 3.5 mm mini jack N/A 3.5 mm mini jack
SD Card Slot
1 slot supports max 2 GB (SD,) max 32 GB (SDHC) 2 slots support max 2 GB (SD,) max 32 GB (SDHC)
HDMI Video Out
N/A Yes
Supply Power
10.2-26.4 VDC Class2 or SELV (Safety Extra-Low Voltage) Circuit or Limited Energy Circuit (LEC),
or use the AC/DC Power Adapter, EA-AC, to power the touch panel from a 100-240 VAC, 50/60 Hz power source. Reverse Polarity Protected
Power Consumption
16.0 W
1.30A @ 12 VDC
0.66A @ 24 VDC
18.0 W
1.50A @ 12 VDC
0.75A @ 24 VDC
18.0 W
1.50A @ 12 VDC
0.75A @ 24 VDC
21.0 W
1.75A @ 12 VDC
0.88A @ 24 VDC
29.0 W
2.40A @ 12 VDC
1.20A @ 24 VDC
Internal Fuse
(non-replaceable)
4.0A 6.3A
Altitude
Up to 2000m (6562 ft)
Operating Temperature
0 to 50 °C (32 to 122 °F); Maximum surrounding air temperature rating: 50 °C (122 °F)
IEC 60068-2-14 (Test Nb, Thermal Shock)
Storage Temperature
–20 to +60 °C (–4 to +140 °F)
IEC 60068-2-1 (Test Ab, Cold)
IEC 60068-2-2 (Test Bb, Dry Heat)
IEC 60068-2-14 (Test Na, Thermal Shock)
Humidity
5–95% RH (non-condensing)
Environment
For use in Pollution Degree 2 environment, no corrosive gases permitted
Noise Immunity
(EN61131-2)
EN61000-4-2 (ESD),
EN61000-4-3 (RFI)
EN61000-4-4 (FTB)
EN61000-4-5 (Serge)
EN61000-4-6 (Conducted)
EN61000-4-8 (Power frequency magnetic field immunity)
(Local Test)
RFI, (145MHz, 440Mhz 10W @ 10cm)
Impulse 1000V @ 1µs pulse
Withstand Voltage
1000 VAC, 1 min. (FG to Power supply )
Insulation Resistance
> 10M ohm @ 500V DC (FG to Power supply )
Vibration
IEC60068-2-6 (Test Fc)
Shock
IEC60068-2-27 (Test Ea)
Emission
EN55011 Class A (Radiated RF emission)
Enclosure
NEMA 250 type 4/4X indoor use only
UL50 type 4X indoor use only
IP-65 indoor use only
(When mounted correctly)
NEMA 250 type 4/4X indoor use only
UL50 type 4X indoor use only
IP-65 indoor use only (not tested by UL)
(When mounted correctly)
NEMA 250 type 4/4X indoor use only
UL50 type 4X indoor use only
IP-65 indoor use only
(When mounted correctly)
Agency Approvals
UL508, E157382**
CE (EN61131-2), RoHS (2011/65/EU)
CUL Canadian C22.2
UL61010, E157382
CE (EN61131-2), RoHS (2011/65/EU)
CUL Canadian C22.2
UL508, E157382
CE (EN61131-2), RoHS (2011/65/EU)
CUL Canadian C22.2
* NOTE: The backlight average lifetime is defined as the average usage time it takes before the brightness becomes 50% of the initial brightness. The lifetime of the backlight depends on the ambient temperature. The lifetime will decrease under
low or high temperature usage.
C-more Panel Dimensions
C-more Panel Mounting
Specifications
A
B
C
D
F
E
G
Optional
EA-AC
Optional
EA-AC
Panel Dimensions
Model
Number
A B C D E F G
EA9-T6CL-R
8.08
[205.2]
6.13
[155.8]
7.40
[188.0]
5.46
[138.7]
1.58
[40.1]
0.32
[8.1]
2.99
[75.9]
EA9-T6CL
8.08
[205.2]
6.13
[155.8]
7.40
[188.0]
5.46
[138.7]
1.58
[40.1]
0.32
[8.1]
2.99
[75.9]
EA9-T7CL-R
8.08
[205.2]
6.13
[155.8]
7.40
[188.0]
5.46
[138.7]
1.58
[40.1]
0.32
[8.1]
2.99
[75.9]
EA9-T7CL
8.08
[205.2]
6.13
[155.8]
7.40
[188.0]
5.46
[138.7]
1.58
[40.1]
0.32
[8.1]
2.99
[75.9]
EA9-T8CL
9.87
[250.7]
7.69
[195.4]
9.19
[233.4]
7.01
[178.1]
2.09
[53.1]
0.32
[8.1]
3.51
[89.2]
EA9-T10CL
12.52
[318.0]
9.53
[242.1]
11.84
[300.7]
8.84
[224.5]
1.93
[49.0]
0.32
[8.1]
3.35
[85.1]
EA9-T12CL
13.37
[339.6]
11.02
[280.0]
12.52
[318.0]
10.17
[258.3]
1.93
[49.0]
0.32
[8.1]
3.35
[85.1]
EA9-T15CL
15.75
[400.0]
12.09
[307.2]
14.88
[378.0]
11.20
[284.5]
1.93
[49.0]
0.32
[8.1]
3.35
[85.1]
Outer edge front bezel
Cutout
D
Cutout
E
A
B
J
J
Additional Installation Information
• Clearance – The mounting clearances when installing the touch panel in an enclosure or cabinet shall be minimum
of 4 inches from the top, bottom and sides and 1.72 inches from the rear.
• Derating – If EA9-T15CL is mounted off the vertical plane facing upward, the temperature shall be derated as shown
below. Other panels may be mounted at any angle without derating consideration.
Units: Inches [mm]
EA9-T6CL, EA9-T6CL-R,
EA9-T7CL, EA9-T7CL-R
and EA9-T8CL
(4 places)
Mounting Bracket
Locations
EA9-T10CL
(8 places)
EA9-T12CL
and EA9-T15CL
(8 places)
0°
15°
90°
Angle: 15° to 90°
Temp: 0 to 50 °C
Angle: 0° to 15°
Temp: 0 to 45 °C
Angle: 0° to -15°
Temp: 0 to 45 °C
Angle: -15° to -90°
Temp: 0 to 50 °C
EA9-T15CL
0°
45°
90°
Angle: 45° to 90°
Temp: 0 to 50 °C
Angle: 0° to 45°
Temp: 0 to 40 °C
0°
Angle: -45° to 90°
Temp: 0 to 50 °C
Angle: 0° to -45°
Temp: 0 to 40 °C
EA9-T15CL
with EA-AC
UL Satisfaction Ratings
Model Number Input Ratings
EA9-T6CL-R
12 - 24 VDC, Class 2, SELV or LEC, Maximum 16.0W
EA9-T6CL
EA9-T7CL-R
EA9-T7CL
EA9-T8CL
12 - 24 VDC, Class 2, SELV or LEC, Maximum 18.0W
EA9-T10CL
EA9-T12CL
12 - 24 VDC, Class 2, SELV or LEC, Maximum 21.0W
EA9-T15CL
12 - 24 VDC, Class 2, SELV or LEC, Maximum 29.0W
Terminal connecting wire size 12 - 24 AWG
Connecting torque 71 - 85 oz-in (5 - 7 lbf-in) (0.5 - 0.6 Nm)
Maximum surrounding air temperature rating, 50°C
For use in Pollution Degree 2 environment
All interface ports are intended to be directly connected to an isolated secondary circuit
For use on a flat surface of a type 4X Indoor Use Only enclosure
Cutout Dimensions
Model
Number
A B D E J
EA9-T6CL-R
8.08
[205.2]
6.13
[155.8]
7.46
[189.5]
5.51
[140.0]
0.31
[7.9]
EA9-T6CL
8.08
[205.2]
6.13
[155.8]
7.46
[189.5]
5.51
[140.0]
0.31
[7.9]
EA9-T7CL-R
8.08
[205.2]
6.13
[155.8]
7.46
[189.5]
5.51
[140.0]
0.31
[7.9]
EA9-T7CL
8.08
[205.2]
6.13
[155.8]
7.46
[189.5]
5.51
[140.0]
0.31
[7.9]
EA9-T8CL
9.87
[250.7]
7.69
[195.4]
9.25
[235.0]
7.07
[179.6]
0.31
[7.9]
EA9-T10CL
12.52
[318.0]
9.53
[242.1]
11.90
[302.3]
8.91
[226.3]
0.31
[7.9]
EA9-T12CL
13.37
[339.6]
11.02
[280.0]
12.57
[319.3]
10.22
[259.6]
0.40
[10.2]
EA9-T15CL
15.75
[400.0]
12.09
[307.2]
14.93
[379.2]
11.27
[286.3]
0.41
[10.4]
Units: Inches [mm]
NOTES: 1. The display screen should be cleaned periodically by wiping it with a lint free damp cloth using a mild soap solution. Use
a dry or slightly dampened cloth to wipe any dirt from the labels on the back of the panel. Dry all surfaces with a lint free
cloth. Do not clean with ammonia based products which are solvents and will damage the face of the panel and the labels
2. The touchscreen is designed to respond to a single touch. If it is touched at multiple points at the same time, an
unexpected object may be activated.
Touch
Panel Size
Enclosure
Thickness Range
Mounting Clip
Screw Torque
Material
6”, 7”, 8”, 10” and 12”
0.039 - 0.20 inch
[1 – 5 mm]
63 - 77 oz-in
[0.45 - 0.55 Nm]
Metal
15”
92 - 106 oz-in
[0.65 - 0.75 Nm]
**Hazardous Location Installation Requirements
Models EA9-T6CL-R and EA9-T6CL Only
Hazardous Location Installation Requirements
SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D HAZARDOUS LOCATIONS, OR
NONHAZARDOUS LOCATIONS ONLY.
WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN SWITCHED
OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS.
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF ANY COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS
I, DIVISION 2.
DEVICES SHALL BE INSTALLED INTO AN ENCLOSURE THAT UTILIZES A TOOL
REMOVABLE DOOR/COVER.
To Previous Page
Loading...
