Need help?Do you have a question about the C-Nav C-NaviGator III and is the answer not in the manual?
General| Model | C-NaviGator III |
|---|---|
| Type | GPS Receiver |
| Update Rate | 10 Hz |
| DGPS | Yes |
| SBAS | Yes (WAAS, EGNOS, MSAS) |
| Communication Interface | RS-232 |
Describes the C-NaviGator III as a self-contained Control/Display Unit with visual aids for monitoring GNSS receiver quality.
Lists key operational capabilities like NMEA monitoring, settings saving/loading, and data logging.
Guides the user through the initial startup sequence, including software updates and system initialization.
Lists logged and displayed alarm conditions, with options to acknowledge them.
Provides solutions for common issues like "No Position Information" and "No Serial Input/Output".
Explains how to download and install new software versions for the C-NaviGator III.
Provides instructions and considerations for installing and mounting the C-NaviGator III unit.
Explains how to connect DC power cables and the support for 24VDC primary and secondary inputs.
Introduces the touch-screen interface for interactivity, brilliance, and power control.
Describes common alarm conditions such as Invalid Navigation and No Communications.
Details specific alarms for the C-Nav3050, including correction signal issues and measurement limits.
Outlines alarms for the C-Nav2000, including correction signal problems and firmware update status.
To Next Page
