Need help?Do you have a question about the C.Nord GSM and is the answer not in the manual?
Outlines the device's intended use and its overall capabilities in security and fire alarm systems.
Details the primary and backup power sources, including voltage ranges and battery maintenance.
Describes various communication channels for transmitting alerts, such as GSM, Ethernet, and radio.
Lists key operational functions, including zone management, wireless device support, and user controls.
Provides essential technical specifications like zone limits, expander compatibility, and operating parameters.
Details the included items, product marking standards, and packaging information.
A list of all components provided with the device.
Information regarding product labeling, bar codes, and terminal markings.
Describes the packaging method to ensure product protection during transport.
Explains the use of TM-Keys for arming/disarming and the associated LED indications.
Details the functionality, buttons, and LED indicators of the K14-LED keypad.
Describes the LCD keypad's features, operation, and screen indications.
Covers the setup and operation of the wireless CN-Keypad.
Explains the use of wireless keyfobs for arming/disarming and as panic buttons.
A visual guide to connecting all external components and interfaces to the device.
Step-by-step instructions for wiring different types of zones and using terminating resistors.
Procedures for connecting four-wire and two-wire fire detectors to the system.
Guide for connecting wired temperature sensors and the CN-Celsius sensor.
Instructions on how to connect the EW-12 expander to increase zone capacity.
Instructions on how to connect the EW-8 expander to increase zone capacity.
Covers SIM card installation, signal level check, and remote antenna connection.
Details on connecting TM readers and compatible devices.
Instructions for connecting wired keypads like K16-LCD and K14-LED.
Steps to connect the device to a computer for configuration and updates.
Guide for installing necessary drivers on older Windows operating systems.
Instructions for installing drivers on Windows 8, including disabling signature enforcement.
How to use the dedicated utility to update the device's firmware.
An overview of the configurator's interface, including control panel and tabbed navigation.
Details information displayed on the configurator's control panel.
Configuration of wired zones, including types, numbering, and state monitoring.
Process for connecting and configuring wireless devices like detectors and keyfobs.
Creating and managing user profiles, assigning TM-keys and keyfobs.
Setting up and managing site partitions for independent arming and disarming.
Configuration of various parameters like intervals, siren settings, and backup power.
Settings for event transmission, device identification, and communication protocols.
Configuration of radio channel settings for event transmission.
Settings for connecting the device to cloud services for remote access.
Configuration of network settings for Ethernet connectivity.
Settings for GSM network operators, including APN and username/password.
Programming automated device actions based on events or schedules.
Viewing and managing the list of recorded device events.
Monitoring the real-time status of communication channels, zones, and wireless devices.
Explains the principles and functions of remote access to the device.
Steps for setting up remote access permissions for engineers.
Procedures for remotely configuring device settings via the engineering panel.
Process for remotely updating the device's firmware.
General| Brand | C.Nord |
|---|---|
| Model | GSM |
| Category | Control Panel |
| Language | English |
To Next Page