Need help?Do you have a question about the C.P.Bourg Document Finisher E Series and is the answer not in the manual?
Ensures correct electrical and environmental conditions before machine setup.
Introduction to the Bourg Document Finisher E-Series operator manual.
Explains the Job Definition Format (JDF) integration for automated workflows.
Identifies safety and warning labels on the front of the machine.
Identifies safety and warning labels on the rear of the machine.
Overview of machine specifications, input/exit, and general capabilities.
Details paper types, sizes, book thickness, and production speeds.
Description of the side joggers and stitching possibilities.
Chart detailing stitching configurations based on machine type and paper width.
Procedures for adjusting and unclutching stitching heads.
Overview of the User Interface touch screen layout and main sections.
Configuring user-specific settings like units, language, and keyboard.
Setting up the sequence and type of machines in the finishing line.
Accessing and configuring booklet realization parameters within the BDF-e tab.
Setting stitching, folding, trimming, and conveyor parameters.
Managing jobs by saving, opening, deleting, and making comments.
Accessing advanced settings like save adjustments and stitch head form.
Procedure for manually processing sets to correct errors or for standalone jobs.
Displaying and managing error and warning messages for the machine line.
Performing fine adjustments while machines are in operation.
Detailed adjustments for stitcher, folder, trimmer, and conveyor in RUN mode.
Routine cleaning and checks for daily operation and machine health.
Cleaning belts, wheels, and threaded rods, plus head manual references.
Cleaning stop fingers of the stitching area to prevent jamming.
Cleaning stop fingers of the stitching area with compressed air and cloth.
Information on proper disposal of the equipment according to regulations.
General| Category | Industrial Equipment |
|---|---|
| Manufacturer | C.P. Bourg |
| Type | Document Finisher |
| Series | E Series |
| Model | E Series |
| Compatibility | Compatible with various digital printers |
| Speed | Varies by model |
| Stapling Capacity | Varies by model |
| Folding Capabilities | Varies by model |
| Input Capacity | Varies by model |
| Output Capacity | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Power Requirements | Varies by model |
To Next Page