ADJUSTMENTS
OF THE THOR II SUBWOOFER
Crossover frequency
In any cases configuration 2.1 or configura-
tion 5.1, the adjustment of frequencies CROS-
SOVER FREQUENCY is positioned as follows:
Level
The adjustment of the LEVEL will depend upon
room positioning, type of amplifier, etc. With the
Thor II subwoofer, the average position of the
LEVEL control is as follows:
For an optimum adjustment of this level, we advise you to car-
ry it out starting from a stereo source (CD).
To adjust the level of the low frequency effect channel (LFE),
do not modify the sound level of the Thor II subwoofer but go
into the set-up menu of your audio video amplifier 5.1 and
adjust the SUBWOOFER / LFE channel.
WARRANTY
We thank you for registering the Cabasse warranty within 60
days after their date of purchase. You can either send us the
enclosed warranty card fully completed or register on line at
www.cabasse.com. In our web site you will also find infor-
mation on the Cabasse manufacturer warranty.
Thanks to the above information, your system is now nicely set
up and you will enjoy your speaker system for many years. We
receive every day letters from customers expressing the ever
growing satisfaction and musical emotion they have been get-
ting with our speakers over the years. These letters are our first
motivation.
english
Because of technical improvements already under way in our constant search for optimum quality, Cabasse reserves the right to modify all the models
presented in specification sheets, advertising materials and manuals without prior notice.
Our web site www.cabasse.com will give you the specific adjustments we recommend for the use of our active subwoofers.
Installation 2/7 channels Active subwoofer
Ways 3 1
Drivers tweeter-midrange 2 ways coaxial BC12 Drive unit 30 cm Ø - type 30M22
woofer 10M15 x 2
Frequency bandwith 80 - 20 000 Hz 22 - 200 Hz
in semi-reverberating chamber
Pulsed sound pressure 117 dB
Efficiency 92,5 dB/2,8 v/1 m
Nominal impedance 8 ohms
Minimum impedance 3,2 ohms active
Power handling 100 W 250 W
Peak power handling 700 W 750 W
Lowpass cut-off frequency from 40 to 180 Hz
Phase switch 0°normal, 180° reverse
Input 2 low level, 2 high level
Magnetic shielding yes on Ki TV on wall/base version
Voltage 115/230 V, AC - 50/60 Hz
Maximum power consumption 165 W
Ki floor standing version Dimensions
dimensions (h x w x d) 125 x 13 x 17 cm - 49.2 x 5.1 x 6.7 in 55 x 34 x 58 cm - 21.7 x 13.4 x 22.8 in
weight 15 kg - 33lb 24 kg - 53 lb
Ki on wall/base version
dimensions (h x w x d) 81 x 13 x 17 cm - 31.9 x 5.1 x 6.7 in
weight 7 kg - 15.5lb
SPECIFICATIONS Ki SPEAKER THOR II SUBWOOFER
TECHNICAL DATA
To Next Page
Loading...
