CABASSE Xo SYSTEM - System Adjustments; Subwoofer Adjustment Settings

ADJUSTING
Subwoofer adjusting
Take care of positioning the sector switch 115V/230V on the right position according to your
country.
The switch on/off of the subwoofer has 3 positions:
ON
AUTO: Automatic, the system is put automatically on ON or OFF according to the
the presence of signal coming from the amplifier.
OFF
Put the switch on/off on AUTO or ON position.
CROSSOVER: adjust the potentiometer on 200 Hz.
VOLUME: The adjustment of the volume will depend upon room positioning, type of
amplifiers… With Xo SYSYEM the average position is on " 12 am ". For an optimum
adjustment of the volume, we advise you to carry out it starting from a stereo source (CD).
Then use the " test tone " of your audio amplifier video 5.1 to adjust the level of channel
SUBWOOFER / LFE.
PHASE: usually it is necessary to position the potentiometer on 0°, however there is 2
positions: 0° and 180 °.
1 / Adjust the potentiometer on 0° when the subwoofer and the satellites are positioned at
the same distance of the listening area.
2 / Adjust the potentiometer on 180° when the subwoofer is positioned 1,50 m/5 ft ahead or
behind the satellites.
16