CLEANING THE WASHABLE LINING
The comfort padding liner is treated with the SANITIZED® process which
provides both the anti-bacterial and anti-fungous action.
• Long-term protection against unpleasant odors.
• Preserves the fabric and provides hygienic freshness and greater comfort to
the wearer
• Prevents the growth of bacteria which causes skin irritation.
Wash it strictly by hand with neutral soap and water (max. 30°C).
Rinse it in cold water, do not wring it. Dry it at room temperature.
WARNINGS! Never clean the lining in the washing machine.
Never use petrol or other solvents to clean the lining.
5. HOW TO FIT THE WASHABLE LINING
5.1 Place the main liner padding inside the helmet.
5.2 Place the plastic frame in the front
E
and fix it to the seat attached to the EPS
liner (Pic. 8).
5.3 Place and fix the lateral fixing strips F between the EPS liner and the shell
(Pic. 9). Follow the same step for the fixing strip in the neck area (Pic. 10).
5.4 Adjust the cheek pads by placing the fixing strip
G
between shell and EPS
(Pic. 11), then hook the buttons .
6. WIND STOP
The wind stop device prevents cold air enterering from below.
6.1 INSTRUCTION TO MOUNT THE WIND STOP
Insert and press the fixing plastic frame of the wind stop between the shell
and the chin gard (Pic.12).
6.2 INSTRUCTION TO REMOVE THE WIND STOP
Slightly pull out the wind stop and remove it (Pic.13).
7. TOP VENTILATION WITH COVER IN CASE OF RAIN
7.1 (Pic. 2) Open ventilation.
7.2 (Pic. 3) Close ventilation.
9
ENG
ego:CASCO RYNO 9-11-2010 10:07 Pagina 8
To Next Page
Loading...
Need help?
General
