Caberg Jackal - Inner Lining Securing and Wind Stop; How to Secure the Inner Washable Lining; Wind Stop Instructions

ENG
6. HOW TO REMOVE THE INNER WASHABLE LINING
6.1 Place the main liner padding inside the helmet.
6.2 Place the plastic frame in the front F and fix it to the seat attached to
the EPS liner (Pic.8).
6.3 Place the plastic frame in the rear E and fix it to the seat attached to
the EPS liner. (Pic.9)
6.4 Adjust the cheek pads by placing the fixing strip G between shell
and EPS (Pic. 10), then hook the buttons
7. WIND STOP
The wind stop device prevents cold air entering from below.
7.1 INSTRUCTION TO MOUNT THE WIND STOP
Insert and press the fixing plastic frame of the wind stop between
the shell and the chin guard (Pic.11)
7.2 INSTRUCTION TO REMOVE THE WIND STOP
Slightly pull out the wind stop and remove it. (Pic.12)
7