To Next PageTo Next Page
Need help?Do you have a question about the Cactus 100 Series and is the answer not in the manual?
Details the USB specifications the UFD product is compliant with.
Lists advanced features managed by the intelligent controller, including error correction.
Explains UFD compatibility with standard USB and future flash technology.
Describes the defect and error management system for enhanced reliability.
Outlines wear leveling and bad block management for data reliability.
Lists environmental operating conditions like temperature, humidity, and shock.
Details DC input voltage and average current consumption.
Provides typical read and write transfer rates for the UFD.
Presents reliability metrics including MTBF, data reliability, and endurance.
Introduces the section detailing the physical attributes of the UFD products.
Refers to figures showing physical specifications and dimensions.
Lists the available storage capacities for the UFD product.
Defines the DC characteristics for the UFD, including operating conditions.
Lists critical maximum ratings for parameters like temperature and voltage.
Details various DC electrical characteristics, including input and output levels.
Describes the model number structure related to capacity and temperature.
Provides examples of how to order specific UFD configurations.
Provides contact information for technical support in Hong Kong.
Provides contact information for technical support in Santa Clara, CA.
General| Interface | SATA III 6Gb/s |
|---|---|
| Operating Temperature | 0°C to 70°C |
| Sequential Write Speed | 520MB/s |
| Shock Resistance | 1500G |
| Vibration Resistance | 20G |
| Form Factor | 2.5-inch |
| Weight | Varies by form factor |
