Cadac S-Type - Page 61

INDEX-III
Revision S2005-6 S-Type
O
one voltage without the other 2-5
Open fader LED 4-8
Oscillator 4-2, 5-2
Oscillator line-up signal level 7-5
Oscillator line-up tone 100Hz 7-5
Oscillator line-up tone 10kHz 7-4
Oscillator line-up tone 1kHz 7-4
Output level to matrix 7-7
P
Pan 4-3, 5-3
PAN control 6-5
Pan control 4-3, 5-3
PFL 4-8, 5-8, 6-2, 6-3, 6-6, 7-9
Phase reverse 4-2, 5-2
Power supply 1-2
Power supply description 2-2
power supply systems GLOSSARY-VII
Power supply unit 2-3
Pre Fader 4-4
Pre fader 5-3
Pre/post fader button with LED 4-4, 5-4
PSU 1 2-1
PSU 2 2-1
R
Rear panel - mono input channel module 8411 4-9
Rear panel group, matrix and output
Stereo 8413 - Mono 8415 6-8
Rear panel stereo input channel module 8412 5-9
Rear panel Stereo output, Comms, Osc and Talkback module 8414 7-10
Remote start of the PSU 2-4
Remote start with a single switch 2-4
Remote start with multiple switches 2-4
Replacing a power supply unit 2-5
Return 2-1
Right channel to matrix output 7-6
S
Selecting send to auxiliary group and setting signal level 3-1
Selecting send to sub-group and setting signal level 3-1
Send 2-1
SEND level control 4-4
Send level control 5-4
Send level/pan Aux 1 5-4
Send level/pan Aux 2 5-4
SEND ON 4-4
Send ON 5-4
Setting up the console 2-1
Signal level meters 6-2
Solo a channel 3-2
Stereo 4-3
Stereo input module 8412 5-1
Stereo output Left 2-1
Stereo output Right 2-1
Stereo output, Comms, Osc & Talkback 1-2
Stereo output, Comms, Osc and Talkback module 8414 7-1
Stereo SEND 1 level control 4-4
Stereo SEND 2 level control 4-4
Sub group output level meter 6-5
Sub-group routing 4-3, 5-3
Sum L+R to matrix output 7-6