Need help?Do you have a question about the Cadac J-Type and is the answer not in the manual?
Describes the unique frame design allowing module placement flexibility and ease of use.
Details the various connectors found on the J-Type console's rear frame for system integration.
Explains the dual redundant power supply system for reliable console operation.
Outlines how to connect multiple console frames using bus and communication links.
Details the setup for connecting computers and the Séance box for console automation.
Explains how to connect main frame facilities from modules to the frame using specific cabling.
Provides the correct procedure for powering up the console and associated PCs.
Overviews the switches, LEDs, and displays on the J-Type CCM control panel for system operation.
Details the rear panel connectors of the CCM module for various interfaces like Fast Copper and MIDI.
Covers selection of CPU clock speed and module power-up state settings.
Describes the Fader Interface module and its global bypass and isolate switches.
Explains the module level software, including initial checks and root displays.
Details navigation and options within the System Setup menu for configuration and testing.
Describes the features and controls of the 7865 Stereo Input Channel module.
Details the functionality and controls of the 7496 Dual Input Channel module.
Explains the features and operations of the 7830 Dual Input Channel module.
Covers the 7925 Programmable Group Module, its matrix routing, and group controls.
Details the 7972 Programmable Aux Groups Module, including its output level and inject controls.
Explains the 7548 Programmable Routing module for routing signals to groups and matrices.
Describes the non-programmable 8059 Dual Input Channel, its routing, EQ, and aux sends.
Details the 6907 Input Channel, including its gain, EQ, and aux send controls.
Covers the 6908 Sub and Matrix module, its inject signal and output level controls.
Explains the 6909 Auxiliary Group module for bus mixing and outputs.
Details the 6912 Stereo return module for line level signals and panning.
Covers the 7106 Quad Panning module for 4-channel panning and routing.
Describes the 6910 module with oscillator, PFL, and stereo aux functions.
Details the 7974 module for oscillator, comms, and PFL functions.
Explains the 6913 Communications module with mic inputs and routing.
Covers the 6978 Communications module with mic inputs, phantom power, and routing.
Describes the 7934 Stereo VCA Fader, its MUTE, Aux VCA, and group selection features.
Details the 7935 Stereo Input Motor Fader, including Write, Ready, and Safe modes.
Explains the 7936 VCA Channel Fader's MUTE, Aux VCA, and group selection functions.
Covers the 7937 Channel Motor Fader, its MUTE, Aux VCA, and Write/Ready modes.
Describes the 7955 DC Master Fader, its MUTE, Isolate, and Fader Open indicators.
Details the 7956 DC Master Motor Fader, including Null point LEDs and Write modes.
Details the 8019 switch-mode power supply unit and its specifications.
Provides instructions for re-calibrating the 8020 PSU's voltage and protection circuits.
Describes critical errors that occur during system startup or operation.
Lists informational errors that occur during startup but are correctable by software.
Explains errors indicating corrupt data that might affect cue performance.
Reports when the error log is full and needs to be cleared.
Indicates issues with MIDI data reception and buffer overflow.
Logs specific user actions or requests that might be relevant when diagnosing errors.
Provides servicing instructions, including cleaning and lubrication for motorized faders.
General| Brand | Cadac |
|---|---|
| Model | J-Type |
| Category | Music Mixer |
| Language | English |
To Next Page