18
5. FAIL SAFE CONNECTION
Your buggy has been equipped with fail safe
battery connection. Your buggy will only start if the
speed control has first been switched off.
6. ATTACHING / REMOVING WHEELS
There is a left wheel and a right wheel. Inside the
wheel on the hub you will find “L” and “R”. The left
and right side is determined from behind the
buggy.
To attach the wheels, place the left wheel on the
left axle. Push the release button across [pictured
over page] and push the wheel on as far as it can.
You will notice you need to match up the female
slots of the wheel and the male of the axle.
When placed in position simply release the button.
You will notice you hear a “click” when the wheel is
properly secured.
To Next Page
Loading...