GUIDELINES FOR USING CADDY MODE
The Caddy Mode function was implemented by utilizing a gyroscope sensor of the
CaddyTalk CUBE. Due to the nature of the sensor, the origin may be distorted by the
surrounding environment (i.e. magnetic field, temperature, etc.). If the different of the
measured distance is great, reset the sensor.
① Power Off
② Hold the power button and the mode button simultaneously for 3 seconds.
③ When the "SET" sign appears in the exterior display, place the product
on a flat floor.
④ When the setting is complete, the “SET” sign will change to the “OK” sign.
Power Off 3sec. Initialization complete
※ If "NG" is displayed in the external display window, please repeat the reset steps.
How to reset sensor
To Next Page
Loading...