Need help?Do you have a question about the caddytrek R2 S-Series and is the answer not in the manual?
Essential precautions to prevent battery fires or explosions, including handling and storage.
Detailed steps for charging the main battery and handset before initial use.
How to check the current charge status of the battery using indicator lights.
Instructions for connecting and using the battery charger correctly.
Steps to power on the unit and handset and establish communication.
Instructions for operating the unit using the handset's directional buttons.
Procedure to recalibrate the handset if the unit veers.
Steps to re-sync the handset with the unit if connection is lost.
Steps to activate and use the remote control mode for operation.
Instructions for enabling and disabling the Obstacle Avoidance feature.
Essential safety precautions and guidelines for operating the unit.
Applying silicon bearing lubricant to prevent seizing.
Adjusting caster wheel tension to prevent damage and battery drain.
Lists operating systems compatible with the firmware update application.
Procedure to start and monitor the firmware update process.
Steps to finish the update, power cycle, and confirm success.
Procedure to change the RF signal band to resolve interference issues.
Procedure to stop the unit immediately by pressing the STOP button.
To Next Page
General