Variance is the difference between magnetic north and
geographic north. In some areas, the difference between
the two can be great enough to cause false compass
readings. If this happens, follow these instructions to set
the variance for your particular location:
1.
Find your location on the zone map. Note the
2.
Hold in the
CAL
switch (on the bottom of the mirror
housing) for five seconds until the current zone
entry
number appears in the display.
To
hold in the
CAL
switch, insert a paper clip into
the
small hole on the
bottom
of
the mirror housing.
3.
Press the
CAL
switch until the number for the new
zone entry is displayed.
zone number.
Once the desired zone number is displayed, stop
pressing the
CAL
switch and the display will show
compass direction within a few seconds.
Power Remote Control
Mirror
(Heated)
The
control on the driver’s
door armrest operates both
outside rearview mirrors.
Rotate the control
knob
to choose the right or
left mirror.
To
adjust the mirror, push the control knob in the
direction you want the mirror to go. Adjust each mirror
so
you can see the side of your vehicle and the area
behind your vehicle.
When
you
operate the rear window defogger, it also
warms both outside mirrors to help clear them of fog
or ice.
The mirrors can also be programmed for personalization
if
you have the optional memory package. For more
information, see “Memory Seat and Mirrors” in
the Index.
2-58
To Next Page
Loading...
