Digital
Cluster
For vehicles equipped with
an
analog cluster (not shown),
fuel
data
can
be obtained by pressing the
INFO
button.
See
“Analog
Control Buttons” later
in
this section.
The
fuel
data panel tells you all you need to
know
about
the
fuel economy and
how
far you can travel with the
fuel remaining.
Press the
AVG
button
to
display the average
mile-per-gallon
(AVG
MPG).
You
can also display it in
metric units by pressing the
ENGMET
button.
When AVG
MPG
is
selected, the total distance
is
divided
by
the
total
fuel used.
When the
INST
button (Instantaneous Fuel Economy) is
selected, you will see what the
fuel
economy
is
at that
instant. The computer takes a new reading twice every
second.
It
will show economy up
to
70
miles-per-gallon
(or
2
L
per
100
km).
To
reset the average fuel economy, press
the
INFORMATION button until the
AVG
MPG
is
displayed
on
the
DIC.
Press and hold
the
RESET
button
until both the fuel data center and
DIC
display reads
0.0.
The
RANGE
display shows how far the computer thinks
you can travel with the fuel that is in the
tank.
The
computer does not
know
what
driving
conditions will be
like for
the
rest of your trip,
so
the range
is
estimated
based
on
the recent fuel economy. Therefore, the range
reading may change as your driving habits change.
Going from city to highway driving may increase the
range reading.
If the range display shows
LO,
you
should stop for fuel
as soon as possible. Your computer needs enough data
for
the
MNGE
reading
to
work.
2-
To Next Page
Loading...
