EasyManua.ls Logo

Cadillac 1997 Eldorado - Page 146

Cadillac 1997 Eldorado
361 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TRIP
RESET
By using this button, you can tell how
far
you’ve gone since you last set the
TRIP
RESET
back
to zero.
To
reset, press and hold the button
until
zeros
appear.
If
your vehicle
is
domestic, the trip odometer
will return to zero after 999.9 miles
(1
609
km).
If
your
vehicle is Canadian, the
trip
odometer will return
to
zero
after
1
999.9
km
(1,242
miles).
INFO
RESET:
Pressing
this
button will reset the
MPG
AVG,
GAL
FUEL
USED,
AVG
MPH,
TIMER,
OIL
LIFE
LEFT
and
ENGLISHMETRIC
RESET.
Pressing
INFO
RESET
when a non-resettable display appears
will cause a “recall” mode to occur. When this happens,
all
DIC
warning
messages that
have
been displayed
since the ignition key was turned to
RUN
will redisplay.
If
no
messages were displayed, a MONITORED
SYSTEMS
QK
message will appear.
MPG AVG
(Reset):
Press the INFO button to display
the
MPG
AVG (Average Fuel Economy),
then
press and
hold the
INFO
RESET
button until
0.0
MPG
AVG
is displayed.
GAL
FUEL
USED
(Reset):
Press the
INFO
button to
display the
GAL
FUEL
USED
on the
DIC,
then press
and hold the
INFO
RESET
button until
0.0
GAL
FUEL
USED
is
displayed.
AVG MPH
(Reset):
Press the
INFO
button to display
the
AVG
MPH
(Average Speed), then press and hold the
INFO
RESET
button until
0.0
AVG
MPH
is displayed.
TIMER:
lhs
feature
is
like
a
stopwatch,
in
that you
can
clock
the
time it takes to get
from
one point to
another.
To
operate, press the
INFO
button to display
TIMER.
Each
of the fields for the hours, minutes and seconds are
two
numeric digits.
Once
TIMER
OFF
O0:OO:OO
is
displayed,
press
the
INFO
RESET
button to start
the
timing feature. Press
the
INFO
RESET
button again to stop
it.
If
you
will
be
starting and stopping your Cadillac, during a trip
for
instance, the TIMER feature will automatically
start
timing where it left
off
when
you
last stopped.
To
reset
it,
press
and
hold the
INFO
FESET
button
until the
display reads
TIMER
0O:OO:OO.
Press the
INFO
button
to exit from the
TIMER
function.

Related product manuals