EasyManua.ls Logo

Cadillac 1997 Eldorado - Page 147

Cadillac 1997 Eldorado
361 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OIL
LIFE
LEFT
(Reset):
Press the
INFO
button to
display the OIL
LIFE
LEFT,
then press and hold the
INFO
RESET
button until
100%
OIL
LIFE
LEFT
is
displayed. (This only needs
to
be reset after you have
had the oil changed.)
ENGLISWMETRIC
(Reset):
Press the
INFO
button
to
display
ENGLISIWMETFUC
RESET,
then press
the
INFO
RESET
button to select. The display will change
from English
(miles)
to
metric (kilometers).
INFO:
Pressing this button repeatedly will display the
RANGE,
MPG
AVG,
MPG
INST,
GAL
FUEL
USED,
MPH,
AVG
MPH,
TIMER,
BATTERY
VOLTS,
COOLANT
TEMP,
OIL
LIFE
LEFT
and
ENGLISWMETRIC
RESET.
FUEL
DOOR:
Press
this
button
to
open the fuel door.
(This
feature will
work
only when the shift lever
is
in
PARK
(P)
regardless
of
whether or not the vehicle
is running.)
TRUNK:
Press this button to open the trunk.
(Ths
feature will work only when the shift lever
is
in
PARK
(P)
regardless of whether or not
the
vehicle
is
running.)
river
Information
Center
These messages will appear if there
is
a problem sensed
in one of your vehicle’s systems. Vehicles that
are
first
sold in Canada will have
a
number after each message.
This number helps to identify
the
message which
is
only
displayed in English.
message displays when
the
engine coolant becomes
hotter than the normal operating temperature.
To
avoid
added
strain
on
a hot engine, the
air
conditioning
compressor is automatically turned
off
so
that
air conditioned
air
is
not delivered. If the coolant
temperature returns to normal, you must select
AC
to
return to a normal
A/C
compressor operation.
If
this
message continues to appear, have the system repaired
as soon as possible to avoid compressor damage.
A/C
OFF
FOR
ENGINE
PROTECTION
-
16:
This
APPLY
BRAKE
TO
SHIFT
-
46:
This message
will appear
if
your vehicle is in
PARK
(P)
for about
15
seconds and the brake
is
not pressed in.
To
remove
this message from the
DIC
display, hold the
OFF
and
the
blue (cooler) buttons on the digital cluster climate
control panel for about five seconds. On the analog
climate control panel, press the
OFF
button (next
to
the
MODE
button) and
the
down arrow on the
PASS
TEMP
button for about five seconds. Hold the
same
two
buttons to display the message again.

Related product manuals