UM:
Ths
setting is similar to
LIVE,
however, more echo
is
present. The
LIVE
and
AUDITORIUM
settings are best used for music.
LEVEL:
Press
the
plus or minus symbol on this button
to adjust the amount
of
effect desired when in
DSP
mode. Some experimenting with
this
button will help
you determine the best sound.
usting
the
Speakers
AX,:
Press this knob lightly
so
it
extends.
Turn
the
knob clockwise to adjust sound to the right speakers and
counterclockwise for the left speakers. The middle
position balances the sound between
the
speakers.
E:
Press ths knob lightly
so
it
extends. Turn the
knob clockwise
to
adjust the sound to the front speakers
and counterclockwise
for
the rear speakers. The middle
position balances the sound between
the
speakers.
Push these knobs
back
into their stored positions when
you’re
not
using them.
laying
a
Cassette
Tape
With the radio
on,
insert a cassette tape. The tape will
begin playing as
SOQII
as it is inserted.
While
the
tape
is
playing,
we
the
VOL,
FADE,
BAL,
BASS
and
TREB
controls just as
you
do
for
the radio.
Other controls
may
have different functions when
a
tape
is inserted. The display will show
TAPE
with an
arrow
to indicate which side
of
the
tape is playing.
PLAY
will
appear
on
the display temporarily when a tape
is
playing.
The
display will then revert back to showing
the time.
If
an error occurs while trying
to
play
a
cassette tape, it
could be that:
The cassette tape is tight and the cassette player
cannot turn the hubs
of
the tape. Hold
the
cassette
tape with the open end down and
try
turning the right
hub counterclockwise with a pencil. Flip
the
tape
over and repeat.
If
the hubs
do
not
turn
easily,
your
cassette tape may be damaged and
should
not
be
used in the player.
Try
a
new tape to be sure
YQUI-
player
is
working properly.
The cassette tape is broken. (Check to see
if
your
tape is broken.
Try
a new tape.)
To Next Page
Loading...
